Ortofon HiFi RONDO BRONZE

The sound from the Rondo Bronze cartridge is very detailed in its spectrum and differentiates the sound source in a refined and homogenous manner. Big orchestral music will be reproduced powerful yet well controlled and open up space around the instrument.

The Nude FG80 diamond is mounted on a conical aluminum cantilever yielding very linear frequency response over the entire frequency range-at the same time ensuring very high tracking ability.

Recommended load resistance between 500 and 100 Ohm depending on personal preference of openness. Higher load resistance will always tend to more liveliness and space in sound-image.

 

TECHNICAL DATA
 
Output voltage at 1000 Hz, 5cm/sec. - 500 µV
 
Channel balance at 1 kHz - 1 dB
 
Channel separation at 1 kHz - 25 dB
 
Channel separation at 15 kHz - 18 dB
 
Frequency range - 20-40.000 Hz
 
Frequency response - 20-20.000 Hz ±1,5 dB
 
Tracking ability at 315Hz at recommended tracking force * - 90 µm
 
Compliance, dynamic, lateral - 15 µm/mN
 
Stylus type - Nude FG80, tapered Al. cantilever
 
Stylus tip radius - r/R 5/80 µm
 
Equivalent stylus tip mass - 0.30 mg
 
Tracking force range - 2-2.5 g (20-25 mN)
 
Tracking force, recommended - 2.3 g (23 mN)
 
Tracking angle - 20°
 
Internal impedance, DC resistance - 6 Ohm
 
Recommended load impedance - 10-200 Ohm
 
Cartridge body material - Grinded wood/Resin comp.
 
Cartridge colour - Bronze
 
Cartridge weight - 10.5 g

 

*Typical value

RONDO BRONZE Image 1